Machine Model: FSC4000D x 9M
- Working area = 3.2 M * 9 M
- Plasma Station – 01 No
- Oxyfuel Cutting Torches – 01 No
- Plasma Torch Height Control with Breakaway Kit – 01 No
- Fastcam + auto nesting – 01 No
- Dual driver
- Note: Cutting Table - Not included
- Plasma Source – Not included
Machine Specifications:
- Working area -------------------------------------------------------------------3200 mm * 6500 mm
- Overall width------------------------------------------------------------------------------------- 4000
- X ,Y pinion ------------------------------------------------------------------------------------------- M1.5
- X servo driver-------------------------------------------------------Mitsubishi servo driver 400 W
- Y servo driver -------------------------------------------------- Mitsubishi servo driver 400 W * 2
Note: (dual drive
- Positioning speed --------------------------------------------------------------------- 18000 mm/min
- Cutting speed -------------------------------------------------------------------------- 10000 mm/min
- Position accuracy ---------------------------------------------------------------------- ±0.1/3000 mm
- Repeatability accuracy ---------------------------------------------------------------------- ± 0.1 mm
- Track type ----------------------------------------------------------------------------Rack and Pinion
- Plasma Power Source -------------------------------------------------------------------- included
- Plasma Torch Height Control -------------------------------------------------------------- 01 set
- Plasma Breakaway Kit ----------------------------------------------------------------------- 01 set
- Oxyfuel Cutting Torch ------------------------------------------------------------------------ 01 set
CNC functions:
- Auto detection-the starting point is pierce or edge cutting. Get the correct preheating time and the correct piercing motion to cut.
- Auto speed reducing-（100％-50％）when cutting circle or arc（plasma cutting), Reduce speed to get little or no bevel.
- Two different cutting speeds-when cutting thicker plates, the beginning speed should be slower than the normal speed, in order to shorten the lead in distance.
- The CNC pulse setting can go up to xxxx.xxxx, 8 digital numbers in total. The CNC Tolerance is 0.5 to ten million.
- Kerf function.
- Pipe cutting function.（option
- After kerf calculation, the end point of inner circle is protuberant or concave.
- Set radius or diameter input for kerf function.
- Gas cutting special function-pierce all starting points first（use improper nozzle）,then back to starting point to cut the shape（use proper nozzle
- Auto continue cutting between each plate,（CNC will automatically cut from one end of a plate to the next piercing point）, to reduce piercing times.
- Auto nesting for circles.
- Automatically divide circles to 2 or 3 pieces when too big to cut.
- Rort and cone development in CNC shape patterns.
- When cutting, can stop and move to anywhere to re-cut.
- Wireless remote control function-acc/dec speed, stop, go/on, forward, reverse, cut.
- Automatically acceleration/deceleration at corners.
- Automatic plate alignment.
- I/O defined by user, if I/O relay breakdown-connect to another connection and redefine.
- Piercing motion can be defined by user.
- Include gas/plasma cutting condition, according to plate thickness.（adjustable
- Set kerf with CAM code table.
- Shape patterns are expandable.
- One or multi torch cutting square plate patterns（for gas/Plasma cutting).
- Many shape patterns for steel construction.
- Nesting on CNC.
- HPGL files converting function, it automatically nests cutting path-inside shape cutting first, than outside shape cutting last.
- Tracing function and data saving in CNC.(option)
- Can easily and rapidly edit shape on CNC （by line arc concept).
- Can convert end-plate-cover circle data to ellipse data for CNC cutting.
- Reverse acc/dec function（different with corner acc/dec）,to extend machine life.
|
